Changing the IB on an IC Markets account requires submitting a partner change request through the IC Markets support team or client portal, since traders cannot switch the linked Introducing Broker directly from account settings. This process typically applies before the account becomes active under a new referral structure, so it is best to complete any IB change before placing trades or making a deposit.
Leverage on an IC Markets account is changed directly inside the Client Portal, under the account settings or leverage adjustment section for each trading account. The available leverage options depend on the account type and regulatory region of the trader, since the maximum leverage for CFDs is generally set by the financial regulator overseeing that country or region.
IC Markets IB commission is paid based on trading volume per lot, and rebate eligibility depends on account type, instrument traded, and whether the trade meets the broker’s qualifying conditions. RebateFX receives this IB commission directly from IC Markets and shares back a portion of the amount actually received with the trader.
Switching partners on IC Markets also depends on the broker’s own IB Program terms, since these terms set the timing restrictions and eligibility requirements for reassigning an account. The sections below walk through how to change the IB on your IC Markets account step by step.
Contents:
How to Change the IB on Your IC Markets Account?

Changing the IB on an IC Markets account follows a defined process involving support contact, a formal request, identity verification, and a confirmation stage before the new partner link becomes active. This process addresses how traders reassign their existing account away from a previous Introducing Broker. The sections below break down each stage, from reaching out to IC Markets to confirming the switch, along with the alternative of opening a new account under a different IB link when a direct transfer is not supported.
What Are the Requirements to Change an IB on IC Markets?
Changing an IB on IC Markets requires an active account in verified status, no unresolved withdrawal or dispute issues, and confirmation that the current IB releases the client link before the new partner assignment takes effect. These conditions reflect the typical support process brokers follow for partner changes, based on standard industry practice rather than a specific published IC Markets policy document. The details below break down each requirement individually.
- Verified account status: identity and address documents pass compliance review before support processes any partner change.
- No pending withdrawal issues: outstanding withdrawal requests or unresolved balance disputes stay closed prior to the transfer.
- Existing IB release: the current Introducing Broker confirms no objection to releasing the client, since some partnership agreements require this acknowledgment.
- Account activity check: the account holds no open or unsettled trades tied to promotional terms from the current IB at the time of the request.
Meeting these conditions in advance generally shortens the review time support needs to approve the switch, based on common broker support workflows. Missing any single requirement, such as an unverified account or an unresolved withdrawal, delays or blocks the IB change until resolved. Traders looking for the exact official requirements are advised to confirm directly with IC Markets support, since specific internal policies are not always published in full.
Can You Change IB Without Opening a New IC Markets Account?
No, IC Markets does not allow in-place IB reassignment on an existing account number, since the partner link attaches to the account at creation and stays fixed for its lifetime. This addresses account continuity when a trader wants a new IB relationship. Three points explain why a fresh account becomes the standard path:
- Partner tagging locks at registration: the IB code entered during signup binds permanently to that specific account number.
- Support processes handle exceptions only: manual reassignment happens case by case through a formal request, not as a self-service settings change.
- New account preserves trading history separately: opening a second account under the new IB link keeps the original account and its trade record untouched.
Traders who want the switch reflected immediately typically open a new IC Markets account tagged to the desired IB. Once the new account is verified, they transfer funds and migrate open positions over to it.
This route avoids delays tied to release confirmations from the current partner.
How to Change Leverage on Your IC Markets Account?

Changing leverage on an IC Markets account happens directly through the My IC Markets client portal, where a trader selects the account, chooses a new leverage ratio, and confirms the update. This process covers how the adjustment gets applied without needing to contact support in most cases. The steps below outline what the portal requires from start to finish.
Applying the change follows a few straightforward steps:
- Log into the My IC Markets dashboard and pick the specific trading account from the account list, since leverage settings apply per account rather than across an entire client profile.
- Open the account details section, where a leverage dropdown displays the ratios available for that account type and regulatory region.
- Select a new ratio and submit the request to apply the change.
- Complete a confirmation email or a brief review in some regions before the update takes effect.
Two restrictions affect this process:
- Accounts holding open positions sometimes face a lower leverage cap during the change, since existing exposure factors into the margin calculation under the new ratio.
- Certain account types, particularly those under stricter regulatory oversight, offer a narrower leverage range than others, limiting how high the ratio can go regardless of the trader’s request.
Is There a Limit on How Often You Can Change Leverage on IC Markets?
**No, IC Markets does not cap how often a trader adjusts leverage on a trading account, since the client portal treats each leverage update as a standard settings change rather than a restricted action.**This point addresses the frequency question tied to leverage changes on IC Markets. A few factors explain why the process stays flexible:
- Portal access stays open: the leverage dropdown remains available in My IC Markets at any time, with no cooldown period between submissions.
- Open trade exposure limits timing: a request submitted while positions are open still processes, though the new ratio applies against existing margin requirements immediately.
- Regulatory account type sets the range: the ceiling on available ratios stays fixed by region, so repeated changes only shift within that same allowed range rather than unlocking higher leverage over time.
Traders adjusting leverage multiple times within a single trading session typically see each update apply without a waiting period, provided no conflicting open trade blocks the new margin calculation.
What Are IC Markets IB Commission and Rebate Rules?

IC Markets IB commission and rebate rules define how commission flows from a trader’s volume to the IB, and then how a portion of that commission returns to the trader as a rebate. This structure covers two connected layers: the broker’s payout to the IB, and the rebate share the IB passes back to the client. The sections below break down each layer separately, starting with how the commission itself gets structured and calculated.
What Conditions Affect the Rebate Amount You Receive?
Four factors shape the actual rebate amount on an IC Markets account: account type, the traded product or instrument, trading volume, and whether the trade qualifies under the rebate program. This set of conditions addresses why two traders under the same IB link end up with different rebate totals. Each factor works alongside the others rather than in isolation.
- Account type: raw spread and standard accounts carry different commission structures, which changes the base amount the IB receives per lot.
- Traded instrument: forex pairs, indices, and commodities generate different commission rates, so the rebate share shifts depending on what gets traded.
- Trading volume: higher lot volume produces more IB commission overall, which increases the total rebate paid out for that period.
- Qualifying trade status: positions closed within program rules count toward the rebate, while trades excluded by IC Markets’ terms or held outside eligible conditions do not generate any payout.
The rebate calculation runs on the IB commission RebateFX actually receives from IC Markets, not on the spread or commission the trader pays directly. A wider spread does not automatically raise the rebate. Only the commission amount IC Markets credits to the IB account determines the payout base before RebateFX applies its share.
What Are the IB Program Terms and Requirements for Switching Partners?

Based on common industry practice rather than a specific published IC Markets policy document, the IB Program terms likely involve three conditions relevant to switching partners: a lock-in period tied to the account’s creation date, a release acknowledgment from the current IB, and an eligibility review before the new partner link activates. These terms address what typically governs a client moving from one Introducing Broker to another, such as RebateFX. The sections below break down each condition and how it shapes eligibility for the switch.
A lock-in period generally refers to a minimum span of time an account must remain under its original IB before a transfer request can be considered. This waiting window is commonly counted from the account’s creation date, and its length varies by broker practice rather than a fixed industry standard.
Does Switching IB Affect Your Trading Account History or Rebate Eligibility?
No, switching the IB on an IC Markets account does not affect trading account history, though rebate eligibility shifts to only cover trades placed after the new partner link activates. This distinction addresses account history continuity versus rebate eligibility as two separate outcomes of the switch. A few points clarify how each side works:
- Trade records stay intact: closed and open positions remain tied to the account number regardless of which IB manages the referral link.
- Past trades keep their original rebate basis: commission already paid out to the previous IB does not transfer or recalculate under the new partner.
- Future trades follow the new link: only positions opened after the reassignment date count toward rebate calculations under the new IB.
- Account statements stay unified: balance history and transaction logs display continuously, without a visible break at the switch point.
Traders opening a new account under a different IB, as described earlier, see this same rule apply separately to each account, since the original account’s history and rebate basis stay untouched under its original partner link.
How Does Switching to RebateFX as Your IC Markets IB Compare to Other Rebate Providers?
RebateFX’s rebate share stands higher than the typical spread-based model many providers use, and this advantage rests on three points: the size of the rebate share, transparency of the calculation formula, and how strictly stated rates stay tied to verified conditions rather than promotional claims.
Many rebate providers in the industry calculate payouts based on spread rather than on the actual commission a trader pays, which makes the real rebate value harder to verify. Some providers also keep their calculation formula undisclosed, presenting only a headline rate without showing how that figure is derived from trading volume or commission.
Switching to RebateFX as an IC Markets IB addresses these gaps by tying the rebate share directly to verified trading conditions rather than to promotional claims. The sections below break down each comparison point separately: rebate share size, formula transparency, and how closely stated rates match actual account conditions.
What Makes RebateFX’s IC Markets Rebate Program Unique?
RebateFX’s IC Markets rebate program distinguishes itself through multi-broker coverage and bilingual support, two features that extend beyond a single-broker rebate arrangement. This point addresses what sets RebateFX apart for a trader switching IB on IC Markets. Two features stand out:
- Multi-broker rebate coverage: RebateFX runs rebate programs across IC Markets, XM, FBS, Tickmill, HFM, and XTB, letting a trader keep one rebate relationship even when managing accounts across different brokers.
- Bilingual support structure: RebateFX operates guidance in Vietnamese and English, covering registration, rebate calculation, and payout tracking for traders in either market segment.
A trader who consolidates the IC Markets IB switch under RebateFX carries this same coverage into any other broker account opened later, since the rebate relationship stays with RebateFX rather than resetting per broker.
Conclusion
In conclusion, changing the IB on an IC Markets account usually requires contacting support, completing account verification, and waiting for confirmation before the new partner link becomes active. Rebate eligibility applies only to qualifying trades placed after the change, while previous trading records and rebates remain associated with the original account or IB relationship. Traders should confirm IC Markets’ current transfer requirements, compare rebate calculation methods, and verify the new IB link before depositing funds or placing trades.

Soren Carrick is a Broker Rebate Program Specialist at RebateFX.org, specializing in Forex rebate programs, Introducing Broker (IB) operations, broker cashback systems, and trading cost analysis. He manages English-language content for IC Markets Rebate, Tickmill Rebate, and XTB Rebate, focusing on account registration, IB transfers, rebate calculations, cashback tracking, and payment verification to help traders understand rebate conditions and manage trading expenses more effectively.

Tiếng Việt